Multi Purpose Power Supply


I needed something more than 12 volts at a reasonable power, and had a 12 volt 20 amp battery charger that I no longer use, so I stripped it down so I could use the transformer, I took all the laminations off, unwound the heavy coil, and rewound with 8 lengths of 24awg wire, I paired each of 2 windings to end up with 4 double wound windings of about 14 volts each.
All the windings come out to individual connections on the front panel, along with all connections from 2 bridge rectifiers, so now I can wire any in series or parallel for different voltages and currents, including the ability to have plus and minus supply..
This is the diagram so far








Copyright 2012 Sparky Projects
Strato Webhosting